Table of Contents
What does a smoke test do?
Smoke Testing is a software testing process that determines whether the deployed software build is stable or not. Smoke testing is a confirmation for QA team to proceed with further software testing. This helps determine if the build is flawed as to make any further testing a waste of time and resources.
Why is it called a smoke test?
According to Wikipedia, the term “smoke testing” likely originated in the plumbing industry; plumbers would use real smoke to discover leaks and cracks in pipe systems. Sometime later, the term appeared in electronics testing. Power up a device… if you see smoke, then, well, that isn’t good.
What should a smoke test cover?
In smoke testing, the test cases usually cover the most important functionalities of the system. The basic objective of this method of testing is not to perform exhaustive testing, but to verify that the critical functionalities of the system are working fine.
What is smoke testing with real time example?
What is Smoke Testing? – Explanation With Example
| Smoke Testing | Sanity Testing |
|---|---|
| Used to the check stability of the system | Used to check rationality in order to move into deeper tests |
| Performed by both developers and testers | Restricted to testers |
| A form of acceptance testing | A form of regression testing |
What is a smoke test for plumbing?
Smoke testing involves forcing smoke-filled air through a sewer line. The smoke under pressure will fill the main line plus any connections; then follow the path of the leak to the ground surface, quickly revealing the source of the problem. Only enough force to overcome atmospheric pressure is required.
What is smoke testing vs sanity?
In a nutshell
| Smoke Testing | Sanity Testing |
|---|---|
| Performed on initial builds | Performed on stable builds |
| Tests the stability of a new build | Tests the stability of a new functionality or code changes in the existing build |
| Covers end-to-end basic functionalities | Covers certain modules, in which code changes have been made |
How long should a smoke test take?
A) While crews might be in your area for a few hours, each actual smoke test setup takes approximately 15 minutes to complete. Most houses will only be within the testing area for one or two tests.
What are the symptoms of a vacuum leak?
Symptoms of a vacuum leak include the Check Engine light, rough idle, stalling and a hissing sound coming from the engine bay. The engine may run well at higher RPMs, but surges, runs rough and struggles to maintain stable RPMs at idle. Often, the engine stalls when stopping.
Is an EVAP leak serious?
Is it Safe to Drive with an EVAP Leak? Most drivers tend to ignore a check engine light, at least until their next service visit. But because an EVAP leak can potentially be a severe and environmentally damaging problem, it’s not a good idea to keep driving with the check engine light on.
What is a smoke test and why is it useful?
Smoke tests are a subset of test cases that cover the most important functionality of a component or system, used to aid assessment of whether main functions of the software appear to work correctly. When used to determine if a computer program should be subjected to further, more fine-grained testing, a smoke test may be called an intake test.
What does it mean to have a smoke test?
What is Smoke Testing? Smoke testing is the initial testing process exercised to check whether the software under test is ready/stable for further testing. The term ‘ Smoke Testing ‘ comes from the hardware testing, in the hardware testing initial pass is done to check if it did not catch the fire or smoke in the initial switch on.
What is the goal of smoke testing?
The goal of smoke testing is to verify that an application’s main features work properly. A smoke test suite can be automated or a combination of manual and automated testing.
What is meant by smoke testing?
Smoke testing, also called build verification testing or build acceptance testing, is nonexhaustive software analysis that ascertains that the most crucial functions of a program work but does not delve into finer details. Smoke testing is the preliminary check of the software after a build and before a release.