How do I reset my BIOS configuration?

Reset the BIOS to Default Settings (BIOS)

1. Access the BIOS Setup utility. See Accessing BIOS.
2. Press the F9 key to automatically load the factory default settings.
3. Confirm the changes by highlighting OK, then press Enter.
4. To save the changes and exit the BIOS Setup utility, press the F10 key.

Can you remove BIOS password?

You can do this by trying a master BIOS reset password, or you can attempt to remove your BIOS’ memory battery. Keep in mind that not all BIOS manufacturers include a master reset password, and not all computers allow you to access the battery.

What is BIOS administrator password?

A BIOS password is authentication information that is sometimes required to log into a computer’s basic input/output system (BIOS) before the machine will boot up. These are passwords created by the BIOS manufacturer that will work no matter what password the user has set up.

Will resetting BIOS affect Windows?

Somewhere under Security, Initialize, or Reset will likely contain it. Clearing BIOS settings will remove any changes you’ve made, such as adjusting the boot order. But it won’t affect Windows, so don’t sweat that. Once you’re done, make sure to hit the Save and Exit command so your changes take effect.

Is BIOS password same as administrator?

What is a BIOS Password? Administrator Password: The Computer will prompt this password only when you are trying to access the BIOS. It is used to prevent others from changing the BIOS settings. System Password: This will be prompted before the operating system can boot up.

What is the difference between the BIOS password and the administrator password?

User password enables machine to boot. Administrator password allows entering the BIOS settings.

How can I remove administrator password?

Option 1: Open the Control Panel in a Large icons view. Click on User Accounts. Enter your original password and leave the new password boxes blank, click on the Change password button. It will remove your administrator password immediately.

Why do we need to reset BIOS?

Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users alike.

What does BIOS do on a computer?

BIOS, in full Basic Input/Output System, computer program that is typically stored in EPROM and used by the CPU to perform start-up procedures when the computer is turned on. Its two major procedures are determining what peripheral devices (keyboard, mouse, disk drives, printers, video cards, etc.)

How do I reset the BIOS/CMOS password?

Or you may be allowed to boot your system, but a password is required to access BIOS Setup. 1. If you cannot access the machine after it has been powered up, you can pull out the CMOS battery and insert it again. In this case all BIOS/CMOS settings will be reset and you will be able to reboot your PC and change the password.

When will I be prompted for the BIOS password?

You may be prompted for the BIOS password right after your machine has been powered up, before the system boots. Or you may be allowed to boot your system, but a password is required to access BIOS Setup. 1. If you cannot access the machine after it has been powered up, you can pull out the CMOS battery and insert it again.

How to remove BIOS password using command prompt?

Method 5: Remove BIOS Password Using Command Prompt 1. Start off by opening a command prompt on your computer. Simply press Windows key + S on your computer, search Command… 2. In the command prompt, run the following commands, one by one, to reset CMOS settings. Remember to type each one of… 3.

How to reset the BIOS password in HP laptop?

1. Run HpqPswd64.exe and press OK button after typing in the BIOS password two times and the BIOS Setup file. 2. Run “HPBIOSUPDREC64.exe -s -fN81_0112.bin -pmypassword -a -h -b”.