Are 7.62 x39 and 7.62 x51 interchangeable?

Are 7.62 x39 and 7.62 x51 interchangeable?

The 7.62×39 is the AK 47 round. Although the bore diameter is the same, they are in no way inter changeable! 7.62×51 is a light machine gun round for the GPMG/FN MAG. This type of round is the same diameter as the 7.62×39 but it has a greater velocity.

Can 7.62 x54r shoot 7.62 x39?

Yes. The 7.62mm round used for the 7.62x39mm is the same diameter as those used in the 7.62x54R. There is load data available that would allow you to use the standard military weight 7.62×39 round in a 7.62x54R loading.

What’s the difference between 7.62 x51 and 7.62 x54?

However, the 7.62×39 and 7.62×54 both have the same bullet diameter. Additionally, the 7.62×51/. 308 Winchester and 7.62×39 are rimless cartridges while the 7.62x54R is a rimmed cartridge.

READ ALSO:   Do women mother their husbands?

Can you shoot 308 ammo in a 7.62 x39 rifle?

The 7.62×39 will not chamber in a 7.62×51/,308. The 7.62x39is roughly equal to the old 30/30 in power while the 7.62×51 is almost equal to the 30/06. If you could some how chamber and fire a 7.62×39 in a 7.62×51/. 308chamber you would most likely blow up the rifle and cause great injury or death to yourself.

What gun uses 7.62 x51 ammo?

It’s most common current military use by NATO forces is for light machine guns, and rifles for snipers and ‘designated marksmen’ engaging targets at extended ranges. It is the standard chambering for the FAL battle rifle, and the US M14. Commercially, it is designated as .

Are all 7.62 rounds the same?

7.62×51 vs 7.62×39 Comparison It’s difficult to compare the two cartridges, as it is not a straight comparison and rarely are any variables the same. They have different powder loads, different grain sizes, and are not interchangeable cartridges.

Is 308 the same as 7.62 x54?

They are not at all related. The 7.62X54 is a rimmed cartridge, developed for the Russian army a hundred years ago. The . 308 is rimless cartridge developed in the U.S. for hunting in the 1950s.

READ ALSO:   How much is a tarot deck of cards?

Are 7.62 x51 and 308 interchangeable?

7.62 NATO WHAT’S THE DIFFERENCE? From an external dimension standpoint, the . 308 Winchester cartridge case and the 7.62 NATO (7.62 x 51 mm) are the same thing.

Is a 308 the same as a 7.62 x54?

No, the 7.62×54 is a rimmed cartridge firing a bullet of about . 311″ diameter. The 308 Winchester is a rimless cartridge firing a bullet of about . 308″ diameter.

What guns use 7.62 x39 ammo?

The 7.62×39mm (aka 7.62 Soviet or formerly . 30 Russian Short) round is a rimless bottlenecked intermediate cartridge of Soviet origin. The cartridge is widely used due to the worldwide proliferation of Russian SKS and AK-47 pattern rifles, as well as RPD and RPK light machine guns.

Can I shoot 7.62 x51 in my ar10?

Location: Williamson Co. If you have 7.62 stamped on your rifle then yes, you can use a dual caliber or vice versa. If you have 7.62 stamped on your rifle then yes, you can use a dual caliber or vice versa.

What is the difference between 7-62×39 and 7-51×51?

The 7.62×51 is also known as the .308 Winchester. It uses a .308 diameter , 147 gr bullet. It has a velocity of 2,773fps. It is 51mm long. It is considered to be a full power battle cartridge.The 7.62×39 is a Russian round normally found in the SKS and the AK-47. It uses a bullet of .312 diameter and 123gr.

READ ALSO:   How quickly do caffeine pills work?

What is the difference between a 7-62 and a 39-mm cartridge?

7.62×39 refers to the cartridge of the Soviet assault rifle. In this 7.62 refers to calibre and 39 refers to the case size. The other is NATO standard in which the case size is 51 mm. Because of this, the ballistics is also different. 7.62×39. Is a 7.62×54. Shortened down. 7.62×39 has the same amount of power as a American 30–30. 7.62×54.

What is the difference between 762×39 and 762×51 rounds?

7.62×39 is a standard round for assault rifles from Russia. The 7.62 isn’t a nice round to receive as it sends a shock wave through the body destroying the organs. 7.62×51 is the 7.62 ‘Long’ and the 7.62×39 is the ‘Short’.

What is the best powder for loading the 7-62×39?

Three good powders for loading the 7.62×39 include W-680, H-4198 and RL-7. Too bad W-680 was dropped years ago. Title Handloading the 7.62x39mm