How do I get my motherboard to recognize a new SSD?

Solution 2: Configure the SSD settings in BIOS

1. Restart your computer, and press the F2 key after the first screen.
2. Press the Enter key to enter Config.
3. Select Serial ATA and press Enter.
4. Then you’ll see SATA Controller Mode Option.
5. Save your changes and restart your computer to enter BIOS.

Do you need to change BIOS when adding SSD?

Usually does not matter cause BIOS will detect all drives automatically. But, if SSD is NVMe and previously SATA was used then NVMe (M. 2) connector might be disabled in BIOS. In this case it must be enabled for BIOS to recognize SSD.

Why can I see my hard drive in BIOS but not Windows?

If the hard drive device driver is outdated, then BIOS can see hard drives but windows can’t. In such a case, you need to update the driver in Device Manager. Select Search automatically for updated driver software.

Why my SSD is not detected in BIOS?

The BIOS will not detect a SSD if the data cable is damaged or the connection is incorrect. Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.

How do I fix an undetectable SSD?

Quick Fix. Unplug and Re-plug SATA Data Cable on SSD

1. Unplug SATA data cable on SSD, leave the power cable connected.
2. Turn on the PC and boot into BIOS.
3. Let PC sit idle in BIOS for about half an hour and turn off PC.
4. Plug the SATA data cable back into SSD and turn on PC to boot into BIOS.

How do I install my new SSD?

How to install a solid state drive

1. Step 1: Unscrew and remove the sides of your computer tower’s case to expose the internal hardware and wiring.
2. Step 2: Insert the SSD into the mounting bracket or a removable bay.
3. Step 3: Connect the L-shaped end of a SATA cable to the SSD.

How do I see hard drive in BIOS?

During startup, hold F2 to enter the BIOS Setup screen. Under Disk Information, you can view all the hard drives installed on your computer. If you can’t see your newly-installed hard drive, please reinstall your hard drive.

How do I initialize my new SSD?

Right-click the SSD that you want to initialize and select Initialize Disk. In the Initialize Disk dialogue box, select the SSD disk you want to initialize and choose the partition style (partition styles are detailed in the next section). Click Ok to begin the disk initialization process.

How do I fix SSD not detected in disk management?

Fix: SSD Not Showing Up

1. Why the SSD does not show up in disk management.
2. Method 1: Troubleshoot hardware and devices.
3. Method 2: Update your motherboard storage controller and IDE ATA controllers drivers.
4. Method 3: Uninstall and reinstall your IDE ATA storage controller drivers.
5. Method 4: Run memory diagnostic tool.

Why is my SSD not showing in BIOS?

How do I activate my SSD in Windows 10?

More videos on YouTube

1. In Windows 10/8, press the “Windows + R” key, type “diskmgmt. msc” and click OK to launch Disk Management.
2. Find and right-click the hard drive or SSD you want to initialize, and then click “Initialize Disk”.
3. In the Initialize Disk dialog box, select the correct disk to initialize.

Why can’t I See my SSD drive in Device Manager?

If you can see SSD drive in Device Manager but you cannot see it in Disk Management or Computer, the drive letter may get lost. You are supposed to assign drive letter in Windows 10. 5. SSD partitions are hidden. If you cannot see your partitions on SSD drive, it may be hidden.

How to fix SSD not showing up in BIOS?

1. Connect the SSD to your computer first. 2. Try to format disk at last. This operation will lead to data loss. If you cannot see SSD in the BIOS, the most common possibility is that the disk cannot be connected up correctly. You need to check it.

How to fix external SSD drive not showing up in Windows 10?

External SSD drive not showing up in Windows 10- fixed by Device Manager Step 1. Press Win + R to summon the Run window, type devmgmt.msc in the box and hit OK to go to device manager. Step 2. In Device manager, go to Universal serial bus controllers, right-click the SSD and then click Uninstall. Step 3. Remove the SSD and restart your computer.

Why is my hard disk not being detected in BIOS?

If your hard disk is not being detected in BIOS, it is possible that the drive has not been set up yet. To set up the drive, follow the steps below. Restart your computer and press the ‘ F2 ’ key or any key according to your PC Note: Different PC manufacturers use different keys to enter the system BIOS.