Table of Contents
How do I lubricate my throttle cable?
Starts here2:32Motorcycle Tech Tips: How To Lube Control Cables | MC GARAGEYouTubeStart of suggested clipEnd of suggested clip57 second suggested clipRegular old engine oil works fine and you can use pretty much any lubricant you want but steer clearMoreRegular old engine oil works fine and you can use pretty much any lubricant you want but steer clear of solvents like wd-40. And penetrating oil now holding the cable vertically.
Can you use WD-40 on bike cables?
Teflon lined cables with inner cables that have corroded and are stuck should be replaced, due to damage to the inner cable and/or liner. In an emergency however, lubrication can help to unstick these cables. Note that WD-40 is NOT a lubricant and should never be used for any type of serious lubrication.
How do you lubricate bike shifter cables?
Starts here1:32Lubricate A Brake Cable Or Gear Cable On A Bike – YouTubeYouTubeStart of suggested clipEnd of suggested clip55 second suggested clipApply a drop of liquid lubrication. At the point where the inner cable emerges from the outer cable.MoreApply a drop of liquid lubrication. At the point where the inner cable emerges from the outer cable. And slide the outer cable back-and-forth to drag the lube into the outer cable wipe off any excess.
How do you fix a sticky throttle cable?
Starts here4:53Fixing a Sticky Throttle Cable – MGF, MGTF & Others – YouTubeYouTube
What do I do if my throttle is stuck?
What To Do if Your Accelerator Gets Stuck
- Keep calm. Take a deep breath.
- Shift to neutral. The key is to shift into neutral when you have a stuck accelerator.
- Put on your hazard lights.
- Apply the brakes.
- Navigate the car to the side or off the road to safety.
- Inspect your pedals.
- Call for help.
How do you lubricate a throttle cable on a dirt bike?
You may notice that throttle cable’s will often not be compatible with the cable luber tool. With these type of cables, you’ll need to just insert the straw into the threaded part on the end of the cable and in short bursts, work the lubricant down the inner length of the cable.
Should you lube shifter cables?
Cable lubrication is recommended, especially if you ride in the rain or have old cable housings. Most brake and shift cables these days have a plastic lining built into the housing, therefore eliminating the need for lubrication.
Can I use chain lube on cables?
Do not use chain lube for your cables. Cleaning and lubricating your throttle cables will help the cables last longer while preventing fraying or snapping.
How do you fix a sticky throttle stick?
How to Fix a Sticky Throttle on a Dirt Bike – Cheap, Easy, and Fast Solution
- Remove Throttle Tube.
- Wipe Down Handlebar and Throttle Tube.
- Scotch-Brite Handlebar and Throttle Tube.
- Apply Small Amount of Grease.
- Tighten Bolts and Test.
How do you unstick a throttle cable?
Pour penetrating oil into the cable (Photo 1). Grab the inner cable with pliers and work it up and down to loosen it. When the cable moves freely and all the penetrating oil has drained out, squirt silicone lubricant into the funnel to keep the cable sliding freely. Reinstall the cable (Photo 2).