What happens if you put a 100 watt bulb in a 40 watt socket?

Any more and you will incur heat damage. That heat damage may be on the ceiling itself, the light fixture’s wiring or the house wiring in the ceiling. And, of course, the worst manifestation is a fire.

When a 60W bulb is connected in series to the 40W bulb which bulb glows more brightly justify your answer?

Answer: Bulbs connected in series each take the same current. Power is also given by the equation P = I2R. With the same current, the bulb with the bigger resistance will dissipate more power. Since the 60 W bulb has the larger resistance, it will be brighter.

When two bulbs of power 60W and 40W are connected in series then the power of combination will be?

When two bulbs of power 60 watt and 40 watt are connected in series then the resulting power their combination will be​ 24 watt. Explanation: The two bulbs such that the power rating of the bulbs are 60 watt and 40 watt respectively and the two bulbs are connected in series. There, Power combination is 24 watt.

When a 40 W and a 100 W bulbs are connected in series then 40 W bulb will glow brighter than 100 W bulb?

Since lamps connected in series, the current flows through both the bulb is same. Let the current flowing through them is I. As R40 > R100, the power dissipated across 40 W is greater than 100 W. Hence 40 W bulb will glow brighter in series connection.

Can I replace a 40W bulb with a 100w?

When it comes to replacing old incandescent bulbs with LEDs, a common question that customers ask is: “Can I use an LED bulb that has a higher wattage equivalent than my fixture allows?” The simple answer is yes, as long as the LED bulb uses less wattage than your fixture.

Can I put a 40W bulb in a 60W socket?

As long as you don’t go over the manufacturer’s recommended wattage, you’ll be safe. If your fixture doesn’t have a wattage recommendation, the rule of thumb is to choose bulbs with 60-watts or lower.

When two electric bulbs of 40W and 60W are connected in parallel with a source then the?

both bulbs will get fused.

When two electric bulbs of 40w and 60w are connected in parallel with a source then the?

What happens if you replace A 40W bulb with a 100W?

A 40 W bulb is connected in series with a room heater. If the 40 W bulb is replace by a 100 W bulb, the heater output will D. None of the above is correct

How much power does a 40 Watt heater use?

The heater’s output in both situations is extremely reduced and is more a function of the series bulb than heater. A normal room heater is about 1500watts, or about 12.5A at 120volts. Normally a 100w bulb draws .83A and the 40w bulb .33A at full voltage.

Why does a 40 watt bulb glow brighter when connected in series?

In Series connection Current through both the bulbs is constant. Resistance of 40 W bulb would be more because W (40 W)=V^2/R 0r R=V^2/W (40). or 220^2/40 = 1210 ohm Brightness is proportional to power consumption and power consumption=i^2xR for 40 Watt bulb will be more. so 40 watt bulb will glow brighter when connected in series.

How much power does a 100 watt light bulb use?

Normally a 100w bulb draws .83A and the 40w bulb .33A at full voltage. Each would draw only slightly less if connected in series with a 1500w 12.5A heater and in both cases, the heater would be operating at much less than its 12.5A normal operating current.