Can I use 20w40 instead of 10W40?

10w-40 it’s mean viscosity 10 when weather cold and viscosity 40 when hot. Similarly, viscosity 20 when cold and viscosity 40 when hot. 10w-40 can give better performance in replace of 20w -40 oil.

Which engine oil is best 10W40 or 20W50?

Is 10w40 good for high mileage? 10W40 is not better than 20W50 for high mileage. The difference between 10w40 and 20w50 is simply that the latter is thicker. As far as gas mileage goes, no oil will improve your gas mileage by changing from 10W40 to 20W50 or vice versa.

Can you bike with 20w 50?

1-48 of 508 results for “20W50 Engine Oil” This synthetic engine oil is compatible with all major two-wheeler brands in India. It is designed to reduce friction and give your bike more power. This synthetic engine oil is compatible with all major two-wheeler brands in India.

Can I use 20W40 engine oil?

If you have an older car with high mileage, using 20w40 is ok. Especially if it is burning oil. I have done this with some of my prior cars and they lasted for years. The only problem is if you live in an area where winter is very cold, it may be hard to start the car with thicker oil.

Can I use 20W50 instead of 10W30?

The main reason for using 20w50 is to slow down oil burning. If this is the case, using 10w30 would speed up the burning. I have had oil burners before, and used 20w50 in the summer, with no problem. But, your car will be hard to start in very cold weather with 20w50.

Can I put 20W50 in my motorcycle?

Suitable Vehicles. Depending on the recommendations for the particular vehicle, 20W50 oil is suitable for large or small diesel engines, gasoline engines, motorcycles and aviation vehicles. It is also suitable for both air- and liquid-cooled engines.

What does 20w50 mean on a motor oil?

What the Numbers Mean. The numbers 20W50 refer to the viscosity of the motor oil, set by the Society of American Engineers. This refers to its fluidity or thickness. The “20W” indicates how quickly the engine will start when cold or in cold weather. The “50” refers to the thickness of the oil when the motor has been running for a while.

Can I use 20W-50 instead of 5W-30 at start up?

Furthermore, at start-up, the 20w-50 will be at least 10 times thicker than the 5w-30 and will pump so slowly you’ll get a high rate of engine wear even before the oil gets to temp. No, your engine is designed to pump the oil recommended at full working temperature which is around 100 deg C.

Can I use any engine oil instead of 20wy?

So, if your manufacturer advises you a 20Wy, you can use other figures as well as far as they are lower than 20. We generally prefer and suggest Motul Engine Oils over other oils available in the market as we have had good experiences with them. In case you still have confusions, you can send us messages at our Official Facebook page.

What type of oil do you use in your 125 motorcycle?

I use fully synthetic Mobil 1 0w-40 in my small hardworking Japanese 125 motorcycle and it has to date done over 50,000 kms, most of that at full speed with little or no warm up, and it is as fresh as the day it was built 8 years ago.