How can concentrated Sulphuric acid can be diluted describe the process?

Yes it can be made diluted by adding water. so dilution of the acid is done by adding the acid into water so that all the heat produced is absorbed by water… so dilution of the acid is done by adding the acid into water so that all the heat produced is absorbed by water…

How will you dilute concentrated Sulphuric acid with water Why?

D. When you mix concentrated sulfuric acid and water, you pour the acid into a larger volume of water. Mixing the chemicals the other way can present a lab safety hazard. Sulfuric acid (H2SO4) reacts very vigorously with water in a highly exothermic reaction.

What happens when concentrated Sulphuric acid is diluted?

Sulphuric acid in dilute form behaves as an acid as the protonation of water rapidly takes place and forms hydronium ions.

How will you dilute concentrated sulphuric acid What will be the effect of dilution on it pH?

Concentrated sulphuric acid can be added to water (and not the other way around as it is an exothemic reaction and can cause the acid to jump out of the beaker and cause burns). On dilution, pH of the solution increases. This is because on dilution, acidic nature decreases.

How do you make a concentrated acid dilute acid?

If we add water in drops to a concentrated acid (If added willingly then it would cause exploision due to the produced heat ),then it would react with the given water and eventually become diluted acid.

How will you dilute concentrated sulphuric acid What will be the effect of dilution on its pH?

Can we dilute concentrated sulphuric acid by adding acid to water?

Yes, concentrated sulphuric acid can be diluted using water. But be care full while adding water to sulphuric acid as it will cause bumping . So, it is preferred to add sulphuric acid in water rather water in sulphuric acid.

How will you dilute concentrated acid give reason for the procedure?

1. A. Add water to concentrated acid.
2. B. Add as strong base to the acid, then add water.
3. C. Add concentrated acid to water.
4. D. Add a weal base to the acid, then add water.

Is dilution of sulphuric acid an endothermic or exothermic process?

When concentrated sulphuric acid is diluted with water to obtain dilute sulphuric acid, a huge amount of energy is released. Thus, this reaction is an exothermic process.

Which of the following is are correct for diluting acid 1 adding acid to water by stirring 2 adding water to acid by stirring?

Answer: Dilution of concentrated acid is an exothermic process. If water is added to a concentrated acid, the heat generated may cause the mixture to splash out and cause burns. When the acid is added to water slowly with constant stirring, the mixture will not splash out.

Why is dilution of sulphuric acid done by adding water?

Describe the process. See what the community says and unlock a badge. as sulphuric acid is very reactive so a lot of heat is produced if water is added go it so dilution of the acid is done by adding the acid into water so that all the heat produced is absorbed by water…

How do you concentrate sulfuric acid from 66\% to 90\%?

To concentrate from say 66\% the process would be carried out in two stages, the first vacuum evaporation stage up would provide up to 88-90\%wt and a second stage at an even lower vacuum giving the final concentration of high concentrated sulfuric acid.

What is the best way to deionize sulfuric acid?

The easiest and safest way to do this is to use (deionized) water. Sulfuric acid is an aqueous acid, so water works fine. Just always remember to add acid to water (never the other way around) and always dropwise.

What is a diluted feed stream for recovery of sulfuric acid?

A common diluted feed stream for the recovery of high concentrated sulfuric acid is e.g a sulfuric acid comming from a chlorine drying process with a concentration of 74-78\%wt. The concentration process is carried out under vacuum in order to decrease the boiling temperature.