How do I reset my Soliom camera?

On the soliom s600 camera the factory reset button is given on the side of the camera.

1. Make sure to turn on your camera.
2. Press the button and hold it for 10 seconds.
3. The LED flashlight will turn off and then turn red.
4. Your camera is not reset. You can now set it up again and continue using it.

How do you set up a Soliom camera?

Please locate the“SOLIOM” in your Google Play Store or App Store to download the Soliom App. 1) Click “Add a device” and then choose “Setup device”,click “Yes”. 2) Input the CORRECT WiFi password of your router, if you input a wrong password you will not be able to connect it successfully.

How do you share a Soliom camera?

Please pair the camera to your phone with the app”soliom”, and then share the QR code in the app to other users. they can scan your QR code to connect the camera to their phone.

How do I reset my camera to factory settings?

Depending on your camera:

1. Select MENU → Settings → Initialize → OK.
2. Select MENU → Setup → Initialize → Reset Default or Factory Reset.
3. Select MENU → Setup → Navigate to Setting Reset → Camera Settings Reset or Initialize.

Why is my Soliom camera not working?

The “outstanding Rule” in IT troubleshooting, especially for the not working soliom cameras, is to reboot the device. You can reboot your soliom support camera to release the cache to flush, settings to recalibrate, and connections to self revise.

How do I reset my wireless camera?

Switch off the network camera by disconnecting the power adapter. Press and hold the reset button with a straightened paperclip while reconnecting the power. Keep the reset button pressed until the status indicator blinks. Release the reset button.

How do I reset my security camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I reset my DVR admin password?

Reset Password of DVR/NVR by Scanning QR Code

1. Tap More > Reset Device Password to enter the Reset Device Password page.
2. Scan the QR code on the local GUI of the DVR or NVR.
3. Go to the device’s local GUI.
4. Enter the received verification code on the Verify by Reserved Email window and then click OK to continue.

How do I get my cameras back online?

Disconnect the Camera from the Power Source and Power Cycle it. The very first thing to try in order to get your camera back online is to disconnect it from the power source. Unplug the camera and let it sit for a few minutes and after a few minutes have passed, plug the camera back in.