Table of Contents
How do you convert Cusec to acre-feet?
1 day = (approx) 24 x 60 x 60 = 86400 seconds.
- 1 cusec-day therefore = 1 x 86400 = 86400 cubic feet.
- therefore 1 acre-foot = 1 x 43560 = 43560 cubic feet.
- So, 1 cusec-day = 86400/43560 = 1.98 acre-ft.
How to calculate acre-foot of water?
Acre-foot (af): * 1 acre = 43,560 square feet. * 1 acre-foot = 43,560 cubic feet. * 1 acre-foot = 325,851 gallons of water = 1233 cubic meters of water. * 1 acre-foot = 0.504 cfs/ day.
How do you calculate Cusec liters?
Answer: 1 Cusec = 28.32 Litres.
How many gpm in 1 cfs?
450 gpm
A flow of one cfs is approximately equal to either 450 gpm, one acre-inch per hour, or two acre-feet per day (24 hours).
How do you convert Cumec to MCM?
The answer is 1000000. We assume you are converting between cubic metre and million cubic metre. You can view more details on each measurement unit: cubic meter or million cubic metre The SI derived unit for volume is the cubic meter. 1 cubic meter is equal to 1.0E-6 million cubic metre.
What is the value of 1 cusec?
28.32 litres
1 cusec is one cubic foot of water flow per second. It translates into 28.32 litres of water per second.
What is 1 acre-foot of water?
about 326,000 gallons
An acre foot of water equals about 326,000 gallons, or enough water to cover an acre of land 1-foot deep. To put it another way, an acre foot of water is enough to flood a football field 1-foot deep (a football field is roughly an acre in size). An acre foot of water is a common way to measure water volume and use.
How do you calculate acre-feet in a pond?
Next, multiply the surface area in acres by the average depth in feet. The result equals the volume of your pond in “acre-feet”. For example, if your pond is one surface acre with a 4 foot average depth, you would have 4 acre-feet of water (1 x 4 = 4 “acre-feet”).
How do you calculate Cusec?
Answer
- Given: 1 Cusec.
- To find : The value of 1 Cusec is equal to in litres.
- Solution: Cusec is used for the measurement of flow rate. Cusec = cubic feet per second. 1 feet=30.48 cm. To convert cm into litres divide it into 1000. “1 Cusec = 28.317 litres per second”
How do you convert GPM to feet per second?
Conversion chart – gallons US per minute to cubic feet per second
- gallon US per minute to cubic feet per second = 0.0022 cu ft/sec.
- gallons US per minute to cubic feet per second = 0.0045 cu ft/sec.
- gallons US per minute to cubic feet per second = 0.0067 cu ft/sec.
How do you convert psi to PSF?
A low pressure value in pounds force per square inch units is converted into pounds force per square foot in the following way:
- 1 psf = 47.8803 pascals (Pa)
- 1 psi = 6894.76 pascals (Pa)
- psf value x 47.8803 Pa = psi value x 6894.76 Pa.
- psf value = psi value x 144.
What is difference between Cusec and cumec?
The distinction: (i)Cusecs: The discharge of the volume of water flowing in the river is measured over time. When the water is measured in cubic feet per second, it is called cusecs. (ii)Cumecs : When the water flowing in the river is measured in cubic metre per second, it is called cumecs.