What can I use to grease my skateboard bearings?

In a pinch, motor oil or even cooking oil will work. Wd-40 is a solvent, not a lubricant. Solvents will wear away at the plastic pieces inside the bearing that make the bearing work, and will limit the life of your bearings. Olive oil is not good, but is better than nothing, and is probably better than using a solvent.

Can I use Vaseline to lube my bearings?

When it comes to bearing, only use petroleum jelly for emergency fixes. However, if the metal temperature of the bearing will not get to the melting point of petroleum jelly, Vaseline should work fine. The other shortcoming of using petroleum jelly as a lubricant on the bearings is the cost.

Can I put WD40 on my skateboard bearings?

It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”

What can I use instead of skate lube?

What Are The Best Skateboard Bearing Lubricant Alternatives?

• Motor Oil.
• Triflow Lubricant.
• Vegetable Oil.
• Canola Oil.
• PAM Cooking Spray.

What do you oil bearings with?

Oil. Oil is the ideal method of lubrication for rolling element bearings.

What kind of lubricant should I use for skateboard bearings?

Good oils are Bones Speed Cream, Tri-flow, and other similar lubricating oils. Motor oil will work too. Bad oils include WD-40 and 3-in-1 (too light). If you use oil, 2 drops are usually enough.

Can you use vegetable oil as lube for bearings?

If you’re in a pinch, there are some skateboard bearing lube alternatives around the house that you can try such a motor oil or even cooking oil to lubricate your bearings. Solvents will eat away at the plastics inside the bearing, shortening the lifetime of your bearings.

What is the best bearing lubricant?

Lithium based greases are very popular as bearing grease due to their water resistance and performance characteristics in both high and low temperatures. Greases comprised of synthetic lubricating fluids perform well in extreme low and high temperature ranges.

Should You Grease Your skateboard bearings?

After drying the bearings thoroughly, they should be greased up. A few lubricants that function admirably for skateboard bearings are sewing machine oils, skate bearing grease, or electronic oils. They perform well because they are thinner oils made particularly for small parts that are engaged in a lot of movement.

Can you use WD-40 to lubricate skateboard bearings?

If you’re in a pinch, there are some skateboard bearing lube alternatives around the house that you can try such a motor oil or even cooking oil to lubricate your bearings. As a forewarning, WD-40 is not a lubricant, it’s a solvent, and therefore should not be used in an attempt to lubricate or grease your bearings.

How do you Grease up a rear wheel bearing?

Overkill, but if you’ve got some lying around the house, you can use it. Spread the grease around with your finger and roll the bearing back and forth until you can see all the balls adequately covered. Gently place the seal back on. It will “snap” into place.

What kind of oil do you use to lubricate a wheel bearing?

Good oils are Bones Speed Cream, Tri-flow, and other similar lubricating oils. Motor oil will work too. Bad oils include WD-40 and 3-in-1 (too light). If you use oil, 2 drops are usually enough. Spread it around by spinning the bearing and re-assemble.