Table of Contents
What does the 265 70r17 mean?
3 Answers. Pushkar Apte. 265 means the width of the tire is 265mm. The larger this number the wider is the tire. 70 is the aspect ratio which means the height of the sidewall of the tire (from the edge of the wheel/rim to the top of the tread) is 70\% of its width, in this case 70\% of 265mm = 185.5mm.
What does 35X12 50R20 mean?
35X12.50R20. Diameter : 35.0″ Width : 12.5″ Wheel : 20″ x 8.5-11″ Sidewall : 7.5″
What do tire sizes mean in inches?
The diameter of the rim in inches. A standard sized tire will be displayed in inches. A tire that reads 33 x 12.5 R15, is 33-inches in diameter (or tall), 12.5-inches wide, and will fit a 15-inch wheel. The door jam of your vehicle will also indicate what size tires the manufacturer recommends.
What does 113 s mean on a tire?
load rating
113 is the load rating, it means the tires can handle up to 2535 lbs. S is the speed index, which means the tires can go up to a speed of 112 mph.
What does P265 mean in tires?
Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall)
What tire size is 35X12 50×20?
Open Country M/T 35X12. 50R20 Tire Specs
| Size | Diameter | Rim Range |
|---|---|---|
| 35X12.50R20LT 121Q E BSW | 35″ | 8.5-11″ |
| 35X12.50R20LT 125Q F BSW | 34.8″ | 8.5-11″ |
What size tire is a 305 55r20?
Plus Sizes
| 305/55-20 | 35/12.5-20 | |
|---|---|---|
| Diameter inches (mm) | 33.21 (843.5) | 35.02 (889.6) |
| Width inches (mm) | 12.01 (305) | 12.52 (318) |
| Circum. inches (mm) | 104.33 (2649.93) | 110.03 (2794.76) |
| Sidewall Height inches (mm) | 6.6 (167.75) | 7.51 (190.8) |
What r means on tires?
radial construction
R indicates the construction used within the tires casing. R stands for radial construction. B means belted bias and D stands for diagonal bias construction. 17 The last dimension listed in the size is the diameter of the wheel rim, which is most often measured in inches.
How do you read tire size?
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65\% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What is the actual tire size?
Actual height at 30 psi is 34.5″ measured at the center of tire with a level. Probably makes a difference if measured at edge of tread. True tire height at 28psi is 34.25″ at 17/32″ tread depth,new tread depth is 21/32″. True tire size at 28psi is 35.1″,brand new tire,zero miles.
What is the correct tire size?
The first number to appear in your tire size information is the width, in millimeters, of the correct tires for your vehicle: P225/70R16 91S. Tire width always refers to the measurement from one sidewall to another. Thus, a tire with the measurement “P225” is for a passenger vehicle and has a nominal width of 225 millimeters.
What does the tire size mean?
Tire sizes are defined by specifications such as the type, width, aspect ratio, speed rating, tire construction type, and service description. There are two organizations, Tire and Rim Association (TRA), and European Tyre and Rim Technical Organisation (ETRTO), that influence tire standards.
How do you check tire size?
How to Check Your Tire Size. This measurement is also referred to as the tire’s section width. Because many people think of measurements in inches, the 225mm can be converted to inches by dividing the section width in millimeters by 25.4 (the number of millimeters per inch).