What factors will affect the cutting speed of the laser cutting machine?

As long as the threshold is above the pass threshold, the cutting speed of the material is proportional to the laser power density, ie increasing the power density increases the cutting speed. The cutting speed is inversely proportional to the density (specific gravity) and thickness of the material being cut.

How Fast Is laser cutting?

cutting speed is about 8m per minute, but if use a 1000w laser cutting machine, the cutting speed is 17m per minute. For cutting the 3mm thickness stainless steel, using a 500w laser cutting machine, the Max. cutting speed only 0.4m per minute, but if use a 1000w laser cutting machine, the Max.

What effects can a laser cutter have on a material?

The laser can cut or etch. The materials that the laser can cut materials like wood, paper, cork, and some kinds of plastics. Etching can be done on almost anything, wood, cardboard, aluminum, stainless steel, plastic, marble, stone, tile, and glass.

What are factors that affects the quality of cutting?

Plate material, plate heat deformation, plate surface quality (rust, foreign matter, etc.) Among the above cutting influence factors, we must pay attention to four of them: Cutting speed….Effect of sheet type and sheet quality on laser cutting quality

• Surface condition.
• Thermal diffusivity.
• Conductivity.

How precise is laser cutting?

Cut width can be extremely small with laser cutting, less than 0.001 inch, and dimensional accuracy is extremely precise, at about ± 0.0005 inch. This accuracy is very useful for producing the jagged teeth used in some cutting tools.

What is a laser cutting machine?

Laser cutting machines are a tool used in a wide range of industries for precision cutting and designing projects. The laser cutting machine emits a high powered laser beam to either cleanly cut or etch a specific design on materials such as steel, plastic or wood.

Why lasers are used for cutting materials?

Laser cutting presents certain advantages over plasma cutting as this process is more precise and uses less energy when cutting steel and aluminium sheets. Laser cutting technology also enables us to cut complex shapes without the need for tooling and at a similar or faster speed than other cutting methods.

What is the impact of laser cutting on society?

impact on the society These lasers have the ability to produce clean and smooth cuts that don’t damage nearby tissues or veins; thus, it will be less likely for scars to form (Hecht). These lasers are perfect to use in surgeries that need to be delicate and precise.

What are the factors affecting the metal cutting process?

The factors are: 1. Velocity 2. Size of Cut 3. Tool Geometry 4.

What are the factors that affect laser processing time?

The final piece of the puzzle for laser processing is the cutting speed. Approximately 80\% of the time while the program is running the laser is cutting, this is the majority of the processing time. The cutting capabilities of the laser is directly proportional to the beam quality and beam waste of the laser.

How thick can a laser cutting machine cut?

For example, a 1000W laser cutting machine can cut 10mm thick carbon steel, but only 4mm stainless steel. Of course, when the laser power is fixed, the thinner the plate, the faster the cutting speed. In this case, the laser cutting thickness and speed are inversely proportional.

What is the power of the fiber laser cutting machines?

We offer fiber laser cutting machines with power range from 1000-12000W, capable of cutting carbon steel up to 30mm and stainless steel up to 45mm . The laser generators and cutting heads are international brands, such as Precitec, Raytools cutting heads, IPG laser source, etc.

What are the disadvantages of laser cutting?

Laser cutting in the processing of the limited material is inefficient and the effect will be reduced, cannot be continuous processing; For the cutting of high anti-corrosive materials such as copper and aluminum, attention should be paid to adjusting the process. It is not recommended to continuously process for a long time.