What happens if you connect the wrong wires on a light switch?
But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
Does it matter which black wire goes where when changing a light switch?
Does it matter which black wire goes where when changing a light switch? – Quora. If it’s a single pole switch with two terminals, the answer is no. One wire is the power to the switch and the other wire goes to the light.
Can you change light switches yourself?
If a switch is damaged, or you just want to update your fittings, it’s quite simple to replace it. Just make sure you write down exactly how the old switch was wired before you disconnect it, and wire the new switch in the same way. Also, try and keep hold of your original screws.
How do I change a switch plate?
- Cut Power. Deenergize electrical circuit that controls switch.
- Remove The Switch Plate Cover. Remove switch cover plate.
- Inspect the Old Switch. Inspect old switch to determine type of replacement model you need.
- Prep the New Switch. ” ”
- Remove Screws.
- Loosen Old Terminal Screws.
- Insert Wires.
- Replace the Switch.
Do both switches need to be 3 way?
In 3way switch setup, power goes into 1st switch, through 2nd switch then to the light. The smart switch must be the 1st switch. So, technically, you only need one smart switch for 3-way switching to be functional; but you must put the smart switch as the 1st switch.
Does black wire go on top or bottom of switch?
Hook the bare wire to the box and to the switch. Hook the black wire to the bottom terminal on the switch. Hook the white wire to the top terminal on the switch. Push the switch into the box and secure it with screws at the top and bottom.