Table of Contents
What is 1/8th of an inch?
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch.
| Inches | |
|---|---|
| fractional | decimal |
| 1/8 | 0.125 |
| 1/4 | 0.250 |
| 3/8 | 0.375 |
What is 1/8 inch on a ruler?
Fraction, Decimal, and Millimeter Equivalent Measurements
| Fraction | Decimal | Millimeters |
|---|---|---|
| 1⁄8“ | 0.125 | 3.175 |
| 3⁄16“ | 0.1875 | 4.7625 |
| 1⁄4“ | 0.25 | 6.35 |
| 5⁄16“ | 0.3125 | 7.9375 |
How do you find 1/8 on a ruler?
The 1/8 of an inch marks are the smaller marks found directly in between the 1/4 of an inch marks on the ruler.
Where is 1/8th of an inch on a ruler?
What is 1/8th of an inch in MM?
3.18 mm
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.125” | 1/8” | 3.18 mm |
| 0.188” | 3/16” | 4.78 mm |
| 0.250” | 1/4” | 6.35 mm |
| 0.313” | 5/16” | 7.95 mm |
What is 1/8 on a tape measure?
The 1/8-inch mark is located between any two 1/4-inch marks. Most work tends to stop at this point, though in some cases you will need to measure down to the 1/16-inch mark. The 1/16-inch mark is the absolute shortest line on the tape measure.
What is 8 of an inch in fraction?
Inch Fraction Conversion Chart – Fraction Decimal and Metric Equivalents
| Fraction (inches) | Decimal (inches) | Metric (millimeters) |
|---|---|---|
| 1/8″ | 0.125″ | 3.175 mm |
| 9/64″ | 0.140625″ | 3.571875 mm |
| 5/32″ | 0.15625″ | 3.96875 mm |
| 11/64″ | 0.171875″ | 4.365625 mm |
What does 1/8 look like on a ruler?
How do you find the nearest 1/8 of an inch?
1/8 of an inch is equal to 0.125 of an inch, so it you know it’s length to at least 0.01 then you must pick the nearest multiple of 0.125. If you are using reactions, find the common denominator of 1/8 and the fraction you are using, divide you measured numerator by new numerator of 1/8, and that’s how many 1/8s you have.
What does it mean to round to the nearest fraction?
The method means that half values will be rounded towards the next integer that is closer to zero than it is to positive or negative infinity. For example: Rounding to fractions involves rounding a given value to the nearest multiple of the chosen fraction. For example, rounding to the nearest 1/8:
What does it mean to round up to the nearest integer?
Rounding up, sometimes referred to as “taking the ceiling” of a number means rounding up towards the nearest integer. For example, when rounding to the ones place, any non-integer value will be rounded up to the next highest integer, as shown below: 5.01. ⇒.
What does it mean to round to the nearest floor?
Round down (floor): Rounding down, sometimes referred to as “taking the floor” of a number means rounding down towards the nearest integer. For example, when rounding to the ones place, any non-integer value will be rounded down to the next lowest integer, as shown below: 5.99.