Table of Contents
What would cause my Kenmore dryer not to heat?
Over time, the heating element can burn out, causing the dryer not to heat. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it. If the heating element assembly does not have continuity, replace it.
There is no reset button on your dryer. I recommend locating the two (2) house circuit breakers dedicated for the dryer and reset both circuit breakers by flipping them both OFF and ON 2-3 times and then check to see if the dryer will start.
Why is my dryer running but not heating?
Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element.
Why is my Kenmore dryer blowing cold air?
With electrically heated dryers, the most common problems are a defective thermostat or an open heating element. In some cases, the high-limit thermostat is a thermal fuse; if this thermal fuse has burned open, the dryer blows cold air. Thermal fuses do not reset, and need to be replaced.
What do I do if my dryer is blowing cold air?
To replace them:
- Dislodge the wires and unscrew the faulty parts.
- Get your new replacement parts and screw in place of the old parts.
- Attach the wires to the metal arms on either side of the components. This is their connection to the heating element.
- Replace the back of your tumble dryer.
Why is my Kenmore dryer not heating?
A dryer that doesn’t heat is sometimes due to a faulty high-limit thermostat. Manufacturers install these devices in both gas and electric dryers to protect the unit from overheating, but they require replacing if activated.
How to repair a Kenmore dryer?
Check the Door Switch. Kenmore dryers require a fully closed door,and slamming the door will not suffice.
Where is the thermal fuse on a Kenmore 80 series dryer?
The dryer thermal fuse on a Kenmore 80 Series dryer is located beneath the back panel. The fuse is situated near the bottom of the dryer on the blower housing. The thermal fuse is a small white piece attached to the panel with a mounting screw.