Table of Contents
- 1 Which Indian standard code is applied for sieve analysis?
- 2 Is sieve a size and number?
- 3 What is sieve No 9 size?
- 4 Is sieve No 10 size?
- 5 What size sieve mesh is standard?
- 6 Which one of the following is the standard is sieve size used for sieve analysis of aggregate?
- 7 Is there any relation between sieve size and sieve numbers?
- 8 What is the difference between a 40 and 200 sieve?
Which Indian standard code is applied for sieve analysis?
to IS : 460-1962 Specification for Test Sieves ( Revised) shall be used.
What are the standard for sieves?
The diameters of the sieves range from 200 to 450 millimeters. American standard sieves also known as ASTM sieves conform to ASTM E11 standard. The nominal aperture of these sieves range from 20 micrometers to 200 millimeters, however these sieves have only 8 inches (203 mm) and 12 inches (305 mm) diameter sizes.
Is sieve a size and number?
Sieve mesh sizes are based on dimensions of the mesh size opening, or on the number of openings per linear inch.
What size is a number 4 sieve?
4.75 mm
5/8″ OP
| Sieve Designation | Nominal Sieve Opening | |
|---|---|---|
| Standard | Alternate | inches |
| 4.75 mm | No. 4 | 0.187″ |
| 4.0 mm | No. 5 | 0.157″ |
| 3.35 mm | No. 6 | 0.131″ |
What is sieve No 9 size?
| Sieve Number | Opening, mm | Wire Diameter, mm |
|---|---|---|
| 7 | 2.83 | 0.92 |
| 8 | 2.38 | 0.84 |
| 9 | 2.00 | 0.76 |
| 10 | 1.68 | 0.69 |
Is sieve sizes for coarse aggregate?
Coarse aggregate means the aggregate which is retained on 4.75mm sieve when it is sieved through 4.75mm. To find fineness modulus of coarse aggregate we need sieve sizes of 80mm, 40mm, 20mm, 10mm, 4.75mm, 2.36mm, 1.18mm, 0.6mm, 0.3mm and 0.15mm.
Is sieve No 10 size?
10 Mesh Sieve, All Stainless, Full Height, 8″ diameter. 8in (203mm) diameter ASTM E11 Test Sieve is built with No.
What size is a #200 sieve?
| ASTM E11 Opening Size | No.200 (75µm) |
|---|---|
| Sieve Frame Diameter | 8in (203mm) |
| Frame Height | Full Height |
| Stacked Frame Height | 2-1/8in |
| Overall Frame Height | 2-5/8in |
What size sieve mesh is standard?
Particle Size Conversion
| Sieve Designation | Nominal Sieve Opening | |
|---|---|---|
| Standard | Mesh | Inches |
| 2.00mm | No. 10 | 0.0787 |
| 1.68mm | No. 12 | 0.0661 |
| 1.41mm | No. 14 | 0.0555 |
Is sieve No 10?
8in (203mm) diameter ASTM E11 Test Sieve is built with No. 10 (2.0mm) stainless steel woven wire cloth and a full-height stainless steel frame. The overall height is 2-5/8in and the stacked height is 2-1/8in….
| ASTM E11 Opening Size | No.10 (2.0mm) |
|---|---|
| Estimated Shipping Weight | 2.0lb (0.91kg) |
Which one of the following is the standard is sieve size used for sieve analysis of aggregate?
The sieves normally used are the standard 8 inch (200 mm) sieves. With Fine Aggregate the coarse sieve or the 3/8” (9.5 mm) sieve at the top; each sieve below is finer; and the finest sieve, a No. 200 (75 µm) is at the bottom.
What is the maximum sieve size of fine aggregate?
The size of fine aggregate is limited to a maximum of 4.75 mm gauge beyond which it is known as coarse aggregate.
Is there any relation between sieve size and sieve numbers?
Are thes(Continue reading) Originally Answered: as per Indian standard code, is there any relation between sieve size and the sieve numbers written on the sieves? YES. they almost follow geometric progression. Due to large variation of sizes we have taken exponential variation.
What is the size of a sieve in USCS?
There will be 4 numbers of 4.76 mm opening present within the one-inch length of mesh. The standard sieve sizes are used in both the USCS method and the ASTM method. The number 200 is the demarcation for clayey soils and number 4 is for the gravel.
What is the difference between a 40 and 200 sieve?
In this way, a #40 sieve would be a 40th of an inch, or just under a millimeter, which is why this size is used as the divider between fine and medium sand. A #200 sieve, the lower end of the fine sand range, is 1/200th of an inch, or about 1/8th of a millimeter, and at the lower limits of what a human eye can see.
What does the sieve number mean in clayey soil?
In the clayey or silt soil, it was not further used to classify the subcategories. The sieve number denotes the number of holes present in the sieve within a one-inch length of the sieve mesh.